Home Page   Company Profile   Our Products


SHUBHAM STARCH CHEM (P) LTD.
 
Home » Products » Modified Starch » Thin Boiling Starch (Ansizotex)

Thin Boiling Starch (Ansizotex)



<< Previous   Thin Boiling Starch (Ansizotex)   Next >>

Product Code : 12

Product Specification
Ansizotex (Thin Boiling Starch)

Introduction:-
Ansizotex is a chemically treated starch suitable for sizing and finishing operations in textile industry.


Description:-
Ansizotex is a partially hydrolysed starch product. Due to the reduction in the chain length, the paste of Thin Boiling Starch is less viscous than that of unmodified starch. It provides uniform & stable Viscosity. Over wide range of concentration.
  • Uniform size pick up.
  • Good penetration.
  • Required handle with higher add on.
Specification:-

Appearance

White to light Yellow Powder

Moisture

12-14

Ash%

0.4-0.8

Soluble

2.00 Max

Viscosity 2% paste on redwood viscometer no 2

19-25

pH

5-7

Acidity for 5 gms using NaOH

1.00 ml

Mesh size-pass through 100 Mesh %

99.80


Applications:-

Textile Industry & Other Industries:-
Ansizotex is ideally suited for use in warp sizing and finishing of cotton and polyester cotton blends. Uniform paste properties of Ansizotex ensure substantially constant textile performance.

The warp threads undergo friction and tension during weaving process. The efficiency of weaving depends upon the resistance of warp yarn to abrasion. Ansizotex provides protection to yarn to meet friction and tension by giving uniform size penetration without developing abrasives points even on oven drying.

Ansizotex being more penetrating give a better anchorage to the starch film reducing flakings or “dropping”. They give more weight to the fabric for the same stiffening effect, and the surface layer being thinner and more firmly fixed for an equal weight of starch, the size is neither visible nor perceptible by the “feel” of the cloth. Thus, it gives both solidity and “fullness” coupled with flexibility distinct from the stiffness of the cloth filled with plain starch with or without clays.

In finishing thin boiling starch like Ansizotex is used for a light finish when very little filling is required to give body to the cloth. Being a low viscosity product it is possible to control the stiffness of the cloth by changes in concentration of Ansizotex.

It is also added to native corn starch in different proportion to change the viscosity of native starch to suit different application in textile industry with respect to denier of yarn & also for further modification Ansizotex is used during manufacturing of paper & food products and for better performance.

Packaging:-
Ansizotex is available in 50 Kgs Plastics lined HDPE woven Bags.
Other Products in 'Modified Starch' category
Specially Modified Starch Adhesive CS-75
Specially Modified Starch Adhesive CS-75
Dextrine (YD & WD)
Dextrine (YD & WD)
Specially Modified Starch Adhesive CS-72 II
Specially Modified Starch Adhesive CS-72 II
Quat (Quaternary Ammonium Cations)
Quat (Quaternary Ammonium Cations)
Cationic Starch (AMPCAT-25)
Cationic Starch (AMPCAT-25)
Shubh Spray
Shubh Spray
 
<< Back


 
Contact Details
SHUBHAM STARCH CHEM (P) LTD.
287-C, HSIDC Industrial Estate, Sector 59, Faridabad - 121004, Haryana, India
Phone:91-129-4155358/4036358/4031869
Fax:91-129-4154358
Send Mail   Send SMS   
Key Personnel
Mr. Anandd Aggarwal (Managing Director)
Mobile:+919811084658, +919873936659